Tube Cut-off After Bend

At Proto-1 Manufacturing, one of our primary goals is to help educate those within the tube and pipe industry. Each month we will be releasing new content focused on educational topics within the tube and pipe industry. This month we will take a look at the different ways to cut-off ... Tube Cut-off After Bend

Tube End Forming | A Virtual Showcase

With the cancellation of Fabtech 2020 due to the COVID-19 pandemic, Proto-1 Manufacturing decided to bring part of our Fabtech display to you virtually to showcase the capabilities of our various lines of tube end forming machines. Within this showcase, you will find a featured tube end forming machine from ... Tube End Forming | A Virtual Showcase

Proto-1 Goes Paperless

*For the sake of this article, all customer names have been removed from any pictured documentation* This year Proto-1 has been making strides to radically reduce the use of paper within the company. In the past, almost every aspect of our processes involved some form of paper with physically handing ... Proto-1 Goes Paperless

Rotary Tube End Forming | Rotary Tube Cut-off

Tube cut-off is the process of cutting a tube to length to be used for another application or process. There are many ways to cut-off tube and pipe, but the most used cutting method is typically completed by a band saw. Band saws are widely used after tube bending applications. ... Rotary Tube End Forming | Rotary Tube Cut-off

July 2020 Newsletter | Tube End Forming Manufacturing

Controlling Lead Times In early 2019, Proto-1 Manufacturing received its ISO 9001:2015 certification. Through our certification process, we were able to streamline and standardize our processes to increase efficiency, minimize errors, increase throughput, and improve quality.  Many of our processes regarding the creation of tube end forming solutions and equipment ... July 2020 Newsletter | Tube End Forming Manufacturing

Rotary Tube End Forming: Tube Flaring

Tube flaring can be found in many of the items that we use on a day to day basis. From automotive exhaust to plumbing and HVAC lines inside homes, tube flaring is used in conjunction to make these connections possible.   There are different ways to form tube flares depending upon the ... Rotary Tube End Forming: Tube Flaring

Newsletter | June 2020

Tube End Forming Machine Refurbishment Proto-1 Manufacturing offers rebuild and refurbishment services to those who have well used Proto-1 equipment. Refurbishment is a cost-effective way to save capital while also updating your equipment to run for many years to come. Here is how our refurbishment/rebuild process works at Proto-1. Once ... Newsletter | June 2020

Proto-1 Manufacturing Update | Tube End Forming Machines

During the course of this pandemic, Proto-1 has continued to operate and serve our customer base through this difficult time. We have installed safeguards for our employees to operate in a safe work environment so we can continue to support essential manufacturing. All our safeguards that we have put in ... Proto-1 Manufacturing Update | Tube End Forming Machines

Newsletter | May 2020

Continuous Improvement: New Flare Tooling Design At Proto-1 we always strive to improve upon our processes and techniques. In a recent project, Proto-1 Manufacturing was tasked with a new challenge. A customer had approached Proto-1 to design a tube end forming solution that could produce 70°, short length, 0.065” wall, ... Newsletter | May 2020

Tube Deburring

Tube deburring can be done in many ways such as using a belt sander. This method poses many issues such as safety concerns and not producing a repeatable process. Proto-1’s deburring equipment and tooling was designed for better operator safety and a more repeatable process. One of the biggest issues ... Tube Deburring